STAHLS’ September Vinyl Cutter Boot Camps and Heat Transfer Vinyl Workshops
Written August 13, 2019
Categories: Apparel Decoration, Industry News, News
Offering in-house vinyl cutting and application allows decorators to serve many profitable markets including teams, schools, fashion, novelty and many other niches. However, with so many fabrics and the wide range of heat transfers materials available, choosing the right heat transfer vinyl can be confusing. On September 25 and 26, STAHLS’ is offering workshops for learning the basics of heat transfer vinyl for decorators to take their vinyl cutter to the next level.
These workshop sessions vary by day and time by location. See below for the schedule of classes.
Florida, Ohio
Heat Transfer Vinyl 101 — $19.95
September 25, 2019
10 AM - 1 PM
Heat Transfer Vinyl 201 — $19.95
September 25, 2019
1:30 PM - 4:30 PM
Heat Transfer Vinyl 101 & 201 Bundle
September 25, 2019
10 AM - 4:30 PM
*Lunch Included
Arizona, California, Michigan, Pennsylvania, Texas
These sessions are held on separate days. On Wednesday is the Roland class and on Thursday is the Graphtec class.
Roland Vinyl Cutter Class & Heat Transfer Vinyl 201
September 25, 2019
10 AM - 4:30 PM
*Lunch Included
Graphtec Vinyl Cutter Class & Heat Transfer Vinyl 201
September 26, 2019
10 AM - 4:30 PM
*Lunch Included
The cost is $39.95 per person for each bundled class.
Check below for locations and contact information and go to http://bit.ly/stahls-workshops for more details. Reserve a spot early; seating is limited.
Here’s a list to find the nearest STAHLS’ location:
STAHLS’ Arizona
6900 W. Morelos Place
Chandler, AZ 85226
(480) 763-1060
STAHLS’ California
160 Vander, Unit C
Corona, CA 92880
STAHLS’ Florida
949 Beville Road
Building D, unit 3-4
South Daytona, FL 32119
(800) 478-2457
STAHLS’ Michigan
6353 14 Mile Road
Sterling Heights, MI 48312
(586) 772-6161
STAHLS’ Pennsylvania
135 Wayland Smith Drive
Uniontown, PA 15401
STAHLS’ Texas
3680 W. Royal Lane, Suite 115
Irving, TX 75063
(469) 706-0700
STAHLS’ Transfer Express
7650 Tyler Boulevard
Mentor, OH 44060
440-918-1900
These workshop sessions vary by day and time by location. See below for the schedule of classes.
Florida, Ohio
Heat Transfer Vinyl 101 — $19.95
September 25, 2019
10 AM - 1 PM
Heat Transfer Vinyl 201 — $19.95
September 25, 2019
1:30 PM - 4:30 PM
Heat Transfer Vinyl 101 & 201 Bundle
September 25, 2019
10 AM - 4:30 PM
*Lunch Included
Arizona, California, Michigan, Pennsylvania, Texas
These sessions are held on separate days. On Wednesday is the Roland class and on Thursday is the Graphtec class.
Roland Vinyl Cutter Class & Heat Transfer Vinyl 201
September 25, 2019
10 AM - 4:30 PM
*Lunch Included
Graphtec Vinyl Cutter Class & Heat Transfer Vinyl 201
September 26, 2019
10 AM - 4:30 PM
*Lunch Included
The cost is $39.95 per person for each bundled class.
Check below for locations and contact information and go to http://bit.ly/stahls-workshops for more details. Reserve a spot early; seating is limited.
Here’s a list to find the nearest STAHLS’ location:
STAHLS’ Arizona
6900 W. Morelos Place
Chandler, AZ 85226
(480) 763-1060
STAHLS’ California
160 Vander, Unit C
Corona, CA 92880
STAHLS’ Florida
949 Beville Road
Building D, unit 3-4
South Daytona, FL 32119
(800) 478-2457
STAHLS’ Michigan
6353 14 Mile Road
Sterling Heights, MI 48312
(586) 772-6161
STAHLS’ Pennsylvania
135 Wayland Smith Drive
Uniontown, PA 15401
STAHLS’ Texas
3680 W. Royal Lane, Suite 115
Irving, TX 75063
(469) 706-0700
STAHLS’ Transfer Express
7650 Tyler Boulevard
Mentor, OH 44060
440-918-1900